Metal Pipe Caps, Steel Pipe Caps for Nominal Pipe
Key Specifications / Features
Model No.: DW CAP3 Hits: 130
Stock Duwa Pipe End Caps and Tube End Caps available in Carbon Steel, and Stainless Steel.
Request a quote
Share
Tags
Detail Information
Our domed metal pipe caps are available in carbon steel, stainless steel and are made out of 10 gage material. Supplied with a mill finish. For additional sizes, materials, and finishes please call for pricing and availability or request a quote.
- Pipe size: 8"
- Outside diameter: 8.625"
- Inside diameter: 7.981"
- Wall thickness: 0.322"
- Height: 4.000"
- Standard wall
- Schedule 40 (150#)
- Round pipe cap
- Beveled ends
- Use with air, water, steam, oil & natural gas
- Butt Weld steel pipe fitting
- Meets ASTM A234 WPB & ANSI/ASME B16.9
Dimensions-of-steel-butt-welding-caps-ASME-B16.9
NPS | OD, D | Length, H | Limiting Wall Thickness for Length, H | Length, H1 |
1/2 | 21.3 | 25 | 4.57 | 25 |
3/4 | 26.7 | 25 | 3.81 | 25 |
1 | 33.4 | 38 | 4.57 | 38 |
1 1/4 | 42.2 | 38 | 4.83 | 38 |
1 1/2 | 48.3 | 38 | 5.08 | 38 |
2 | 60.3 | 38 | 5.59 | 44 |
2 1/2 | 73 | 38 | 7.11 | 51 |
3 | 88.9 | 51 | 7.62 | 64 |
3 1/2 | 101.6 | 64 | 8.13 | 76 |
4 | 114.3 | 64 | 8.64 | 76 |
5 | 141.3 | 76 | 9.65 | 89 |
6 | 168.3 | 89 | 10.92 | 102 |
8 | 219.1 | 102 | 12.7 | 127 |
10 | 273 | 127 | 12.7 | 152 |
12 | 323.8 | 152 | 12.7 | 178 |
14 | 355.6 | 165 | 12.7 | 191 |
16 | 406.4 | 178 | 12.7 | 203 |
18 | 457 | 203 | 12.7 | 229 |
20 | 508 | 229 | 12.7 | 254 |
22 | 559 | 254 | 12.7 | 254 |
24 | 610 | 267 | 12.7 | 305 |
26 | 660 | 267 | … | … |
28 | 711 | 267 | … | … |
30 | 762 | 267 | … | … |
32 | 813 | 267 | … | … |
34 | 864 | 267 | … | … |
36 | 914 | 267 | … | … |
38 | 965 | 305 | … | … |
40 | 1016 | 305 | … | … |
42 | 1067 | 305 | … | … |
44 | 1118 | 343 | … | … |
46 | 1168 | 343 | … | … |
48 | 1219 | 343 | … | … |
(1) Length H applies for thickness not exceeding that given in column “Limiting Wall Thickness for Length H.” | ||||
(2) Length H1 applies for thickness greater than that given in column “Limiting Wall Thickness” for NPS 24 and smaller. For NPS 26 and larger,length H1 shall be by agreement between the manufacturer and purchaser. |
Comment Form